Tire problem: brake teeth
(sawtooth wear on the front tire)
Question:
For some time now my front tire has been wearing unevenly. It has a sawtooth appearance. How can this happen? Is it the tires themselves, my bike or perhaps my riding style – I am a “sporty corner carver”. My tire dealer could not give me an answer to this problem and advised me to change the tires. Could this also have something to do with the fork or the springs?
Answer:
When braking while leaning, the front tire is under particular stress. On top of the slip angle of the tire comes the contact pressure increased by braking. In extreme cases everything is at the limit of grip, i.e. in the range where cornering force and the remaining possible deceleration start to break down. Accordingly the tread rubber is stressed by stretching, flexing and tension. With a slick racing tire the wear shows as a minimally concave wash-out in the middle area of the tread shoulder. With tread-pattern tires the blocks wear unevenly, depending on the design of the grooves. The well-known result is the roof-tile-like “sawtooth pattern”. If it is pronounced, the tire should be replaced. Increased sawtooth wear on the front tire can also occur with calm riding, for example when the tire pressure is set too low. Therefore check the pressure regularly and set it according to the manufacturer’s specifications. Typical for modern high-performance sports tires are the large, connected tread blocks with very little negative profile, i.e. with few grooves. These tires are less prone to sawtooth wear than more finely profiled touring tires. Sawtooth wear therefore has nothing to do with the fork itself or the fork springs.